Jarvis Cutting Tools is an industrial manufacturer of Aerospace Fastener Taps, Multilead Taps, Spiralock Compatible Taps, Custom Taps, and more. Call (603) 332-9000 to place your order today.
Firstly, the new and improved Jarhook is the best available tap for A286 fasteners. During extensive testing the Jarhook surpassed all of the competition in tool life and tapping speed. The data speaks for itself. In a controlled test the 10-32 Jarhook achieved an average tool life of 1200 holes at a speed of 1000 RPM in A286 6 point nuts. This outperformed the competition at this speed by over 30%.
Secondly, Jarvis offers high performance nib taps for tapping on Davenport Machines. These taps are available as nibs alone or as a welded assembly of the nib and the shank. The nib tap can be custom made to accommodate any thread length necessary for the application. Jarvis has extensive experience making short thread length spiral pointed nib taps along with long chamfer straight fluted nib taps.
In addition, Jarvis has extensive experience tapping collars in a variety of materials ranging from Aluminum to Titanium 6Al 4V. Therefore, this experience has assisted in the development of the optimum cutting geometries for these material specific applications.
Locking threads are common on a number of aerospace applications. Unfortunately most of the tap manufacturers making these locking thread form taps only offer a general purpose tap. However, Jarvis offers material specific Jarlock taps for the aerospace market. Some of the material they work with are Inconel 718, Waspaloy, Titanium 6AL 4V, etc. They guarantee these taps will work with Spiralok® gages. [View Jarlock Brochure]
Of course, Jarvis offers both multilead cut and form taps for the aerospace market. Some multilead applications they are familiar with are Inconel Inserts and A286 panel fasteners. Their material specific multilead taps will outperform the competition any day of the week. [View A286/Inconel recent project]
JET ENGINE HOUSING
Jarvis excels in tapping 718 Inconel in any condition. Accordingly, they have shown exceptional tool life in tapping engine components made from Inconel 718 super alloy that has gone through the HIP process. Because of this, these engine’s components can be found on any general commercial airline.
Jarvis has tapped holes in components of the new F-35 fighter jet engine. They successfully increased the customers tool life by 300% in a proprietary super alloy.
Jarvis has the answer to maximizing tapping speed and optimizing cycle times. They offer:
- High Performance Surface Treatments
- Free Cutting Geometries
- Proprietary Geometry
- Ground Male Center Taps for shorter tap throw
Most importantly, effectively controlling the direction of the chip is essential for tool and machine up-time. Whether you are tapping a standard length fastener or a long-barreled fastener, Jarvis has designs to insure that the chips are released by the taps and you do not experience “pull back”. Similarly, Jarvis also has developed solutions to evacuate chips from counter bored parts. Thus, if your operators are modifying taps, contact Jarvis for factory ground solutions.
BLIND HOLE APPLICATIONS
Jarvis offers the highest performance SPFL taps on the market. Using a wide range of spiral flute helixes and cutting geometries they can solve any blind hole problem you may come across.
In conclusion, Jarvis custom manufactures taps for all special and exotic requirements. Some of the features they offer are:
- Coolant Through
- Left Hand
- Nib Taps
- Radius Crest
- Special Thread Forms
- Tapered Threads
For more information on Aerospace Fastener Taps, Multilead Taps, Spiralock Taps, or Custom Taps, visit https://www.jarviscuttingtools.com/